Cut Lab · Functional parts · Generator alpha

Connector plate

Build L, T, cross, pergola, timber, and custom angled connector plates with editable arms meeting at a shared joint.

Part inputs

Build a radial connector

Layout preset

Decorative ends

Common length inCommon width inCommon end fillet inInside corner radius inHole rowsHoles per rowHole shapeHole size inSquare-hole fillet inLast hole from nominal end inRow spacing in

Common dimensions update every existing arm. Arm length runs from the joint origin to the nominal end; decorative tips may extend beyond it. Hole rows run along the arm. Row spacing is across its width. One hole per row is centered between the two setback limits.

Radial members

Arm 1 - 0 deg

Angle preset

Angle degrees Length inWidth inEnd fillet inMatch common hole pattern

2 row(s) - 2 stations - square

First hole from joint in

Measured outward along this arm from the joint at (0, 0), to the first hole center. Increase this to move the corner-side holes away from the joint. Overlapping holes from different arms are merged or omitted and reported below.

Arm 2 - 180 deg

Angle preset

Angle degrees Length inWidth inEnd fillet inMatch common hole pattern

2 row(s) - 2 stations - square

First hole from joint in

Geometry checks passed

2 radial members - 8 closed hole contours - one manufactured body.

Live manufacturing preview

Connector plate

8 holes

Dimension detail

Arm 1 detail · rotated to read left-to-right · in

Detail shows this arm’s requested holes before overlap resolution at the joint. The full plate above shows the final exported holes. Leaders and rulers are not exported.

Arm 1: 0 degArm 2: 180 deg

Metal retainedRounded-square carriage holes

This tool creates user-defined geometry; it does not engineer or certify a structural connection. Consult a licensed engineer for structural applications.

Fast geometry

Set each arm’s length, width, and angle from the shared joint. Rulers and labeled arm details show how the dimensions relate.

Carriage bolts

Choose round holes or rounded-square holes with an adjustable internal fillet.

Important limits

This tool does not calculate loads, fasteners, material thickness, code compliance, or structural capacity. Consult a licensed engineer for structural applications.